Tel. : +33 556 899 207
Total exc. VAT
Total inc.  VAT

Total exc. VAT:

Our Products

Wastewater pumps control
1 pump - Type V1B type

ORDER
0,00 €
0,00 €
 

USE

Control and protection unit for 1 lift pump (up to 5,5 kW 380 V) with automatic cyclic changeover.
Control by 2, 3 or 4 switches or level regulator floats.
See this product in our catalogue
Control and protection unit for 1 pump (up to 5,5 kW 380 V) with automatic cyclic changeover
Control by 2, 3 or 4 switches or level regulator floats
Operational safety on defect of one of the floats
Successive restart of pumps after power cut.
Dry contact output for pump fault report
Operational safety through immediate switchover to emergency pump in the event of fault on the pump in operation.
Selector switch for stopping pumps (simultaneous or deferred)
Alarm sounds for over-flow level
Power supply: SINGLE PHASE 230 V or THREE PHASE 230/400 V
Potentiometer for thermal protection against overloads, can be set from 1 to 13 A (1 per pump)
Protection against phase failure
Main switch with network terminals
Three pole fuse holders with protection fuses, calibrated motors
Switch with motor connection terminals
Running switch, 3 positions AUT-O-MAN (quick), per pump:

  • Light indicators for POWER ON and OVER-FLOW LEVEL
  • Light indicators for ON and OVERLOAD, per pump
  • Reset button for pump fault (RESET)


Low voltage power supply (12 Vdc) for external control for increasd security.
High protection cable glands

Power supply voltage : 230 or 400 Vac (can be selected) 50/60 Hz
Voltage tolerance: +10% -15%
Max. intensity (per pump) : 12 A (per pump) AC3
Max. power: 5,5 KW 400 V / 3 KW 230 V
Over-current setting: 1-13 A (adjustable)
Trigger point for under-current 0,5 A
Float connections : 12 Vdc / 50 mA
Cross-section at terminal low voltage: 4 mm2
Direct network connection at switch
Direct motor connection at switches: 4 mm2
Wall mounted by 4 brackets and screws (supplied)
Weight: 3 Kg
Protection level: IP56
Operating temperature: -10 + 55°C


Download the operating instructions for V1B lift pump control units
 

Related Products