USE
Hot-water heating systems
Domestic and commercial buildings.The electronic controls allows for setting advanced features
Wet rotor high efficiency circulator, driven by a permanent magnets synchronous motor (PM motor) controlled by an on board inverter.
The motor is protected against overload thanks to a thermal protection and an automatic electronic release function of the rotor.
No external protection is required.
Operated by selector technology.
ErP 2009/125/EC Standard.
Automatic speed control system able to adapt to the changing needs of the system. The circulator delivers the performance you need with minimum energy consumption
Automatic unlocking programme
Automatic detection of air
3 modes : Proportionnal differential pressure, constant differential pressure or fixed speed between min-max.
Conditions of use:
- maximum pressure : 0,7 Mpa (7 bar)
- Ambient temperature 2° to 40°C
- Liquid temperature 2° to 95°C
- Liquid temperature at 30°C ambiant : 30° à 95°C
- Liquid temperature at 35°C ambiant : 35° to 90°C
- Liquid temperature at 40°C ambiant : 40° to 70°C
- Minimum pressure on the intake opening at 50°C : 0,03 MPa (0,03 bar)
- Minimum pressure on the intake opening at 70°C : 0,10 MPa (1 bar) à 95°C
- Maximum relative humidity : 95%
- Approved fluids : Water for heating according to VDI 2035. Mixtures of water and glycol with glycol percentages not greater than 30%.