Pressure control system
BRIO 200 M type

USE

The Brio 2000 pressure regulator is a device which allows for automatization of the start and stop process of a pump.
It controls pressure drops (opening of taps) and the interruption of flow (closing of taps) in the installation on which the pump has been fitted.
It also carries out the important function of a hard stop by disactivating the pump in there is a water shortage, which protects it from the damage caused by dry-running.
The manometer controls pressure for start-up as well as the pressure of the installation. It checks among other things for potential leaks in the installation itself.
Delivered pre-cabled with: cable (,50 m long)and molded male plug for power supply and socket (0,60 m long) for connecting to motor.

Conditions of use:

• Voltage : 230 V 50/60 Hz - 12 A.
• Setting range : 1 to 3,5 bar.
• Pre-set start up pressure: 1,5 bar.
• Max. temperature: 55°C.
• Max. flow rate: 80 l/mn - 4800 L/h.
• Max. pressure: 10 bar.
• IP 65 protection.
• Brio 2000 should be used in installations where the water passage is without sediments. If this is not the case, one must fit a filter on the intake port of the device.

See this product in our catalogue